Trustpilot
BASS FACE XSPLT.1 - 4Ohm Professional Slot Type Single Bullet Tweeter 200w RMS - Audio Boffins Ltd

Site Information

 Loading... Please wait...
  • Call us on 07534 390719 or 01733 570557
  • My Account
  • Gift Certificates
  • BASS FACE XSPLT.1 - 3QTR FRONT VIEW
  • BASS FACE XSPLT.1 - FRONT VIEW
  • BASS FACE XSPLT.1 - SIDE VIEW
  • BASS FACE XSPLT.1 - 3QTR BACK VIEW
  • BASS FACE XSPLT.1 - 3QTR SIDE VIEW
  • BASS FACE XSPLT.1 - OUTER PACKAGING

BASS FACE XSPLT.1 - 4Ohm Professional Slot Type Single Bullet Tweeter 200w RMS

£35.99
SKU:
XSPLT.1
Weight:
1.00 LBS
Shipping:
Calculated at checkout
Quantity:

Product Description

In Europe the slot type tweeter is an important development because the advanced nature of the installations and the sheer size of them means that often the tweeter installations end up taking up most of the available space just to keep up with the bass. These huge tweeters are the answer, with highly directional performance and outstanding presence both physically and audiably! The tweeters are supplied for safety with 3.3uf capacitors which will result in a crossover frequency of 12Khz when connected in a 4 ohm configuration which is obviously not the optimum but if you're bothering to read this specification and understand what 12Khz is then we are not adding these capacitors for you... (wink wink). We recommend that you set up for a minimum frequency of 1.5Khz at any appreciable level of volume and adjust to taste. If you really want to use all the performance then obviously you'll need to increase the crossover frequency to get the high power handling; a 4/5Khz being a popular crossover point that allows a balance of power handling and sound reproduction.

Version History

In March 2017 a request was made from the Greek distribution for a high end slot type tweeter which would keep up with their enormous bass systems. It turned out to be quite difficult to engineer with several factories unable to complete the task. After some development an excellent, very powerful product was developed. Dimensionally the unit is large but should fit in deep 4 inch apertures or obviously is open to custom installation. V1 – The first batch is built to a high standard and is supplied with 3.3uf capacitors to enable immediate connection to a full range supply at 6db/oct with a 12k (!) crossover at 4 ohms. This is an attempt to stop un-informed clients from damaging the units even if they connect in an 8 ohm configuration (6k). BASS FACE note that some improvements may be made for V2 which will be:
1) Print the Bassface logo on the front panel of the tweeter.
2) Correct the spelling mistake on the box of the product (XPLT.1) on the small detail panel.
3) Include a rubber gasket for mounting.
4) Improve the protection around the packaging for shipment to mail order end users. Obviously none of these things are performance related and XSPLT.1 is a terrific product in V1 form right out of the box.

Key Facts

Product Category Tweeters & Horns
Version 1
Series Hammer
Date Modified 17/01/2017
Barcode 683422302121
Production Status Current
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 1400
Product Height (mm) 70
Product Length (mm) 104
Product Width (mm) 104
Complete Product Pack Weight (g) 1460
Retail Carton L (mm) 110
Retail Carton W (mm) 110
Retail Carton H (mm) 85
Warranty (Months) 12
Sold As Single

Tweeter Data

Recommended Cable PSC12.1
Voice Coil Diameter (mm) 45
Overall Depth (mm) 70
Mounting Depth (mm) 58
Front Protrusion From Mounting Plane (mm) 12
Overall Diameter (mm) 115
Magnet Diameter (mm) 90
Installation Cutout Diameter (mm) 92
Magnet Type Y30
System Maximum Power (Watts) (Using Pair Of Tweeters Not Necessarily Included) 800
System RMS (Watts) (Using Pair Of Tweeters Not Necessarily Included) 400
System Maximum Power (Watts) (Single Tweeter) 400
System RMS (Watts) (Single Tweeter) 200
Frequency Response (Hz) 1500-20000
Impedance (Ohm) 4
Sensitivity (db/1Wm) 103

Technical Highlights

  • Extreme Slot Type Tweeter
  • Best Choice For SPL
  • Supplied With 3.3uF Capacitors Fitted For Safety - Proper Performance Requires Tailored Crossover Point
  • Spade Terminals
  • Pro Audio Inspired Features For Extreme SPL
  • Extra Wide Frequency Range
  • High Performance Magnet

What's In The Box?

  • 1 x Slot Type Tweeter

Find Similar Products by Tag

200w  BASS  BASSFACE  BULLET  FACE  LOUD  PRO-AUDIO  PROFESSIONAL  Single  SUPER  tweeter  Type  

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the BASS FACE XSPLT.1 - 4Ohm Professional Slot Type Single Bullet Tweeter 200w RMS to your wish list.