DIGITAL DESIGNS 212
The 200 series is hand built for high performance. Keeping overall system economy in mind, Digital Designs made the 200 series to have high output on as little as 100-300 Watts. The laminated double layer poly cotton spider in the 200 works well in sealed enclosures and compact vented designs.
The 200 series woofers features:
- Double Stitched EROM Surrounds
- High-temp 2.0”, aluminum former voice coil
- 100W-300W RMS
- 900W Peak
- Non-pressed paper cones
- Stamped Steel Basket with cooling vents
- 10-AWG Push Terminals
- Bumped Back plate w/ coil gap venting
- 3-Way cooling
- Extended pole piece
- 50oz magnet
The 200 series is offered in 10” and 12” basket size with a single 4ohm voice coil.
*SPL (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”
**Xmax specifications are derived via one way voice coil overhang method with no correction factors applied.
Parameters are ran after initial suspension break in and will change over the products lifetime.
|Continuous Power Range||100-300 watts||100-300 watts|
|Burst Power||900 watts||900 watts|
|Impedance Options||Single 4 Ohm||Single 4 Ohm|
|Suspension Type||Dual Layer Poly-Cotton||Dual Layer Poly-Cotton|
|Magnet Weight||50 oz||50 oz|
|Fs||41.05 hz||32.3 hz|
|Vas||.598 ft^3||1.499 ft^3|
|**Xmax||10 mm||10 mm|
|2-Way Suspension Travel||64 mm||64 mm|
|Displacement||.05 ft^3||.08 ft^3|
|Frame OD w/ gasket||10.375"||12.5"|
|Frame OD w/o gasket||10.125"||12.25"|
|Shipping Weight||11 lbs||12 lbs|
|F - Outside Height||.75||.75|