- CAR STEREOS
- CAR RADIO HARNESS
- Audi Quadlock BOSE Steering Wheel Control Interface (Best for RNS-E systems)
Audi Quadlock BOSE Steering Wheel Control Interface (Best for RNS-E systems)
Car audio and steering wheel control interface for Audi cars that have quadlock connectors behind the radio and have fully amplified BOSE audio systems.
Also switches on original amplifier on RNS-E systems.
This CANbus steering wheel control interface will allow you to retain the use of the steering wheel audio controls.
Gives volume, seek, source, and telephone commands to an aftermarket radio.
The quadlock adapter has 4x phono pre-out connectors to integrate with the original amplifier in the car.
The CANbus interface will generate an ignition power supply to the new radio, it will also give out an illumination signal, speed pulse signal, reverse gear output and handbrake output.
This interface needs to be used with a 49- series patch lead to suit the make of head unit that is being fitted. Please select your brand of radio from the drop down list above.
Helpful Information & Links:
- Audi - A3 (8P) facelift & 8PL Cabriolet (2008 - 2013)
- Audi - A4 (B7) (2005 - 2008)
- Audi - A4 Cabriolet (2001 - 2009)
- Audi - TT (8J) (2006 - 2014)
- Seat - Exeo (3R5) (2009 > )
Vehicle Models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Find Similar Products by Tag
Best to replace OEM RNS-E
Posted by Angela on 12th Sep 2019
I was replacing a factory fitted RNS-E in an Audi TT MK2 (8J) and this worked just as needed so it switches the amp on, which others don't do. Meant I could do plug and play and no extra wiring needed. Great service from Gavin and fast delivery too.